IZOZENĀ® IZOREL 1
IZOZENĀ® IZOREL 1 is an oil-based shutter/mold release agent that ensures clean, fast, and easy striking of formwork.
Key Properties:
Allows clean, easy striking
Extends the life of formwork
Improves finishing for fair-faced concrete
Reduces blow hole formation
Does not promote rusting of steel formwork
Suitable for hot and tropical climates
Technical data
Form: Blend of refined mineral oils & anti-corrosive additives
Color: Yellowish to amber liquid
Specific Gravity: ~0.85 kg/L (25Ā°C)
Directions for Use
Supplied ready to use.
Shutter surfaces must be clean, dry, and free from dirt, laitance, rust, and residues.
Apply one thin, even coat by brush, roller, cloth, or spray.
Remove excess material with a cloth or scraper to avoid puddles or streaks.
Do not water the applied coating, even if dry.
Allow the release agent to evaporate before concreting.
Clean tools and equipment with detergent and lukewarm water.
ā ļø Over-application may cause stains on hardened concrete.
Fields of Application
IZOZENĀ® IZOREL 1 is mainly used for:
Steel shuttering
Plywood shutters
High-density plastic shutters