IZOZENĀ® FASTFIX AC
IZOZENĀ® FASTFIX AC is a cold-mix pothole patch designed for permanent repairs in asphalt and concrete. It is water-activated, solvent-free, VOC-free, and traffic-ready immediately after compaction. The product is safe, non-toxic, and environmentally friendly, offering a reliable repair solution in all weather conditions.
Key Benefits
Permanent repair solution for potholes.
All-weather use: suitable for cold, warm, wet, or dry conditions.
Traffic-ready immediately after compaction.
Eco-friendly: no solvents, no VOCs, no hydrocarbon leaching.
Sealcoatable after one-hour cure.
Easy application without special equipment.
Technical data
Form: Cementitious co-polymers
Colors: Grey / White / RAL 7621, 5002
Water Demand: 1.00 ā 2.00 L/Kit
Application Temperature: +5Ā°C to +35Ā°C
Mixing Time: 3ā5 minutes
Pot Life: ~60 min (+23Ā°C)
Minimum Thickness: ~1 mm
Crack Bridging (at +23Ā°C): ā„ 1.13 mm
Bulk Density (Dry Mortar): 1.40 Ā± 0.05 kg/L
Bulk Density (Fresh Mortar): 1.70 Ā± 0.1 kg/L
Initial Tensile Adhesion Strength: ā„ 0.7 N/mmĀ²
Tensile Adhesion After Water Contact: ā„ 0.6 N/mmĀ²
Durability: Resistant to aging, moisture, and water pressure
Resistance to Water Pressure: Positive pressure after 3 days; negative pressure after 7 days
Directions for Use
1. Substrate Preparation
Ensure surface is clean, dry, and free of oil, grease, loose material, and dust.
Remove standing water.
In freezing conditions, all ice must be cleared before application.
2. Application Procedure
Fill pothole with IZOZENĀ® FASTFIX AC up to Ā½ inch above surface.
Spread evenly with a rake or trowel.
Generously sprinkle water to fully wet the material.
Compact with hand-tamper, vibratory plate, or roller until smooth.
If level is low, add more material, sprinkle water, and re-compact.
For potholes deeper than 3ā, fill in two layers, compacting each layer.
Fields of Application
IZOZENĀ® FASTFIX AC is ideal for:
Roads and highways
Parking lots
Bridge decks
Driveways and utility cuts
Manhole repairs
Tennis courts and walkways
Pathways
Both asphalt and concrete pavements
Gradation Analysis
| Sieve Size (mm / inch) | % Passing |
|---|---|
| 25 mm (1ā) | 100% |
| 19 mm (Ā¾ā) | 90 ā 100% |
| 12.5 mm (Ā½ā) | 70 ā 95% |
| 4.75 mm (No. 4) | 40 ā 60% |
| 2.36 mm (No. 8) | 20 ā 35% |
| 0.075 mm (No. 200) | 2 ā 8% |