IZOZENĀ® POLYMER-MODIFIED SEALER (PMS)
IZOZENĀ® POLYMER-MODIFIED SEALER (PMS) is an environmentally friendly, mineral-filled asphalt emulsion pavement sealer blended with polymers and surfactants. It offers:
Superior adhesion, flexibility, and durability
Higher solids and faster drying compared to standard sealers
Protection and beautification for asphalt pavement
Compatibility with sand/aggregate for enhanced performance
PMS meets ASTM D8099/D8099M-17 standards and complies with FAA Item P-623 specification for Emulsified Asphalt Spray Sealcoat.
Technical data
| Test Standard | Property | Result |
|---|---|---|
| ASTM D5 | Penetration | 12ā45 Pen |
| ASTM D6937 | Density | 1ā1.3 kg/l |
| ASTM D113 | Ductility | 5ā15 cm |
| ASTM E70 | pH | 6ā10 |
| ASTM D36 | Softening Point | >200Ā°F |
| ASTM D562 | Viscosity | 60ā110 KU |
| ASTM D4060 | Abrasion Resistance | <1% Loss |
| ASTM D522 | Flexibility | No Cracking |
| ASTM D870 | Water Immersion | No Delamination |
| ASTM D6904 | Wind-Driven Rain Resistance | No Delamination |
| ASTM D4585 | Condensation Test | No Delamination |
| ASTM D3910-6.4 | Wet Track Abrasion | <15 g/ftĀ² Loss |
| ASTM D2247 | Humidity Resistance | No Delamination |
| ASTM D4541 | Adhesion Strength | >200 PSI |
| ASTM D2939-5/7/8/10/14/22/25/26/27 | Multiple Bitumen Tests | PASS |
| ASTM D95 | Water Content | 40ā60% |
| ASTM D2172 | Asphalt Content | ā„16% |
| ASTM D4799 | UV Aging (1,000 hrs) | No Color Fade |
| ASTM D3359 | Adhesion by Tape | PASS |
| VOC | Volatile Organic Compounds | <10 g/l |
| PAH | Polycyclic Aromatic Hydrocarbons | <0.10% |
Key Properties
Enables self-compacting concrete (SCC)
Strong self-compacting behavior
Improves trowel-ability and surface finish
High final density and strength properties
Reduced shrinkage, creep, and water permeability
Excellent flowability with minimal compaction efforts
Very good cost/performance ratio
Reduced curing requirements
Chloride-free (safe for reinforced and pre-stressed concrete)
Directions for Use
Substrate Preparation
Ensure the substrate is clean, free of oil, grease, loose material, and dust.
Pavement repairs must be completed with hot or cold asphalt mix.
Fill cracks using IZOZENĀ® hot pour or cold applied crack fillers.
Mixing Procedures
For every 100 gallons of PMS:
PMS: 100 gallons
Sand (40ā70 mesh): 200ā400 lbs.
Note: Mix design may be adjusted for local pavement conditions.
Application Methods
Apply with mechanical squeegee/brush equipment or spray equipment with continuous agitation.
For large areas, truck-mounted or self-propelled squeegee/brush equipment with multiple applicators is recommended.
Hand squeegees and brushes may be used for small or restricted areas.
Fields of Application
IZOZENĀ® PMS is suitable for:
Parking lots
Shopping malls
Airports
Driveways
Roadways
Other asphalt pavement surfaces