IZOZENĀ® FLEXSTOP LITE 101
IZOZENĀ® FLEXSTOP LITE 101 is a ready-to-use, hydrophobic, and pore-blocking waterproofing powder admixture. It modifies the concrete microstructure to block water transport, thereby improving impermeability and durability.
Key Benefits
Improved workability without increasing water demand
Increased impermeability
Easy to apply ā suitable for DIY
Strong waterproofing properties
Effective in hot and tropical climates
Technical data
Form: Organic polymer blend (powder)
Color: Beige to Grey
pH Value (25Ā°C): 5ā8
Density (23Ā°C): ~0.9 kg/L
Chloride Ion Content: Nil (EN 934-2)
Total Chloride Content: < 1%
Flash Point: None
Air Contents: Nil
Packaging: 1 kg, 10 kg, 20 kg, and 25 kg bags
Shelf Life: 12 months from production (if stored properly)
Storage Conditions:
Store in original, sealed packaging
Keep in dry conditions at +5Ā°C to +35Ā°C
Protect from frost and direct sunlight
Directions for Use
Add IZOZENĀ® FLEXSTOP LITE 101 to the dry cement/sand mix before adding water.
Recommended dosage: 2% by weight of cement
Higher dosages may be used depending on mix design, raw materials, and climate.
Trial mixes are recommended to confirm the exact dosage.
Fresh concrete must be cured properly to prevent shrinkage. Use IZOZENĀ® IZOCURE curing products for best results.
Ensure suitability tests are carried out on fresh mortar or concrete before execution.
Design concrete mixes using local materials and confirm performance through trials.
Cleaning:
Wash all equipment and tools with clean water immediately after use.
Fields of Application
IZOZENĀ® FLEXSTOP LITE 101 is suitable for:
Waterproofing cement/sand mortars, screeds, and renders
Wall and faƧade treatments
Floor toppings
Jointing mortars