IZOZENĀ® POLYMER-MODIFIED SEALER (PMS)

IZOZENĀ® POLYMER-MODIFIED SEALER (PMS) is an environmentally friendly, mineral-filled asphalt emulsion pavement sealer blended with polymers and surfactants. It offers:

  • Superior adhesion, flexibility, and durability

  • Higher solids and faster drying compared to standard sealers

  • Protection and beautification for asphalt pavement

  • Compatibility with sand/aggregate for enhanced performance

PMS meets ASTM D8099/D8099M-17 standards and complies with FAA Item P-623 specification for Emulsified Asphalt Spray Sealcoat.

Technical data

Responsive ASTM Table
Test Standard Property Result
ASTM D5 Penetration 12–45 Pen
ASTM D6937 Density 1–1.3 kg/l
ASTM D113 Ductility 5–15 cm
ASTM E70 pH 6–10
ASTM D36 Softening Point >200°F
ASTM D562 Viscosity 60–110 KU
ASTM D4060 Abrasion Resistance <1% Loss
ASTM D522 Flexibility No Cracking
ASTM D870 Water Immersion No Delamination
ASTM D6904 Wind-Driven Rain Resistance No Delamination
ASTM D4585 Condensation Test No Delamination

Key Properties

  • Enables self-compacting concrete (SCC)

  • Strong self-compacting behavior

  • Improves trowel-ability and surface finish

  • High final density and strength properties

  • Reduced shrinkage, creep, and water permeability

  • Excellent flowability with minimal compaction efforts

  • Very good cost/performance ratio

  • Reduced curing requirements

  • Chloride-free (safe for reinforced and pre-stressed concrete)

Directions for Use

Substrate Preparation
  • Ensure the substrate is clean, free of oil, grease, loose material, and dust.

  • Pavement repairs must be completed with hot or cold asphalt mix.

  • Fill cracks using IZOZENĀ® hot pour or cold applied crack fillers.

Mixing Procedures

For every 100 gallons of PMS:

  • PMS: 100 gallons

  • Sand (40–70 mesh): 200–400 lbs.

Note: Mix design may be adjusted for local pavement conditions.

Application Methods
  • Apply with mechanical squeegee/brush equipment or spray equipment with continuous agitation.

  • For large areas, truck-mounted or self-propelled squeegee/brush equipment with multiple applicators is recommended.

  • Hand squeegees and brushes may be used for small or restricted areas.

Fields of Application

IZOZENĀ® PMS is suitable for:

  • Parking lots

  • Shopping malls

  • Airports

  • Driveways

  • Roadways

  • Other asphalt pavement surfaces